Fiberlogy
-
FIBERFLEX FILAMENT Blue 30D 1.75mm Fiberlogs 850g
Fiberflex is a thermoplastic elastomer with a hardness of 30D Shore, which can be printed at a speed of up to 45 mm/s. This rubber material can be extended to 680 % of the original size. Thanks to its material properties, it is destined for use to places that require frequent bending.
1-7 days (10000000 pcs)
52,25 €
-
FIBERFLEX FILAMENT Black 30D 1.75mm Fiberlogs 850g
Fiberflex is a thermoplastic elastomer with a hardness of 30D Shore, which can be printed at a speed of up to 45 mm/s. This rubber material can be extended to 680 % of the original size. Thanks to its material properties, it is destined for use to places that require frequent bending.
1-7 days (10000000 pcs)
51,36 €
-
EASY PLAIMENT ONYX 1,75mm Fiberlogs 850g
Easy PLA is one of the most widely used 3D printing materials, as the name suggests for its easy use. This filament lasts quite a lot and its properties allow printing of very accurate and complicated elements.
1-7 days (10000000 pcs)
27,10 €
-
PLALAMENT refill light green 1.75mm fiberlogs 850g
Fiberlog refill is an environmentally friendly solution because it is a string without a coil. The Easy Pla Refill is the same as the classic Easy PLA, which is one of the most commonly used print materials. The simplicity of the press should satisfy the hobby printers and professionals.
1-7 days (10000000 pcs)
22,17 €
-
PLALAMENT refill white 1,75mm fiberlogs 850g
Fiberlog refill is an environmentally friendly solution because it is a string without a coil. The Easy Pla Refill is the same as the classic Easy PLA, which is one of the most commonly used print materials. The simplicity of the press should satisfy the hobby printers and professionals.
1-7 days (10000000 pcs)
22,17 €
-
Petg Easy Filament Refill Wine Red Transparent 1,75mm Fiberlogs 850g
Fiberlog refill is an environmentally friendly solution because it is a string without a coil. The Pet-G Refill material is the same as the classic Fiberlog PET.
1-7 days (10000000 pcs)
22,17 €
-
EASY PLAYENT AURORA 1,75mm Fiberlogs 850g
Easy PLA is one of the most widely used 3D printing materials, as the name suggests for its easy use. This filament lasts quite a lot and its properties allow printing of very accurate and complicated elements.
1-7 days (10000000 pcs)
26 €
-
Nylon PA12 + CF15 Black 1,75mm 500g Fiberlogs
PA12 + CF is a modification of the already durable Nylon fiber PA12, which was reinforced by adding 15 % carbon fibers. PA12 + CF is characterized by high thermal resistance and smaller shrinking compared to the unmodified Nylon PA12. The application of carbon fibers makes it possible to reduce the weight of the component while maintaining high structural stiffness.
1-7 days (10000000 pcs)
63,74 €
-
Fiberflex Filament Yellow 30D 1.75mm Fiberlogs 850g
Fiberflex Filament Yellow 30D 1.75 mm Fiberlogs 850 g. Fiberflex is a thermoplastic elastomer with a hardness of 30D Shore, which can be printed at a speed of up to 45 mm/s. This rubber material can be extended to 680 % of the original size. In addition, it is highly resistant to low temperatures, also well -resistant abrasion and chemicals.
1-7 days (10000000 pcs)
52,25 €
-
EASY PLAYENT GRAYS 1,75mm Fiberlogs 2500g
EASY PLALAMENT Gray 1.75 mm Fiberlogs 2 500 g. One of the most widely used 3D printing materials, as the name suggests for its easy use. This filament lasts quite a lot and its properties allow printing of very accurate and complicated elements.
1-7 days (10000000 pcs)
67,02 €
-
Petg Easy Filament Refill Silver 1,75mm Fiberlogs 850g
Petg Easy Filament refill silver 1.75 mm Fiberlogs 850 g. This is a print string without a coil. Easy Pet-G Refill is the same as the classic Easy PETG series.
1-7 days (10000000 pcs)
24,08 €
-
Fiberflex Filament beige 30d 1.75mm Fiberlogs 850g
Fiberflex Filament beige 30d 1.75 mm Fiberlogs 850 g. It is a thermoplastic elastomer that is highly resistant to low temperature impacts.
1-7 days (10000000 pcs)
52,25 €
-
Fiberflex Filament pink 30D 1.75mm Fiberlogs 850g
Fiberflex Filament Pink 30D 1.75 mm Fiberlogs 850 g. It is a thermoplastic elastomer that is highly resistant to low temperature impacts.
1-7 days (10000000 pcs)
52,25 €
-
Fiberflex Filament Red 30D 1.75mm Fiberlogs 850g
Fiberflex Filament Red 30D 1.75 mm Fiberlogs 850 g.
1-7 days (10000000 pcs)
52,25 €
-
Wood Filament White 1,75mm Fiberlogs 750g
Wood Filament White 1.75 mm Fiberlogs 750 g. Material with a natural look that offers a wide range of uses thanks to the beautiful surface surface, not only for works of art and design elements.
1-7 days (10000000 pcs)
43,10 €