Fiberlogy
138 products
-
Add to Favourites
FIBERFLEX 40D FILAMENT RED 1.75mm Fiberlogs 850g
Fiberflex is a thermoplastic elastomer with a hardness of 40d Shore, which can be printed at a speed of up to 45 mm/s. This rubber material can be extended to 680 % of the original size. In addition, it is highly resistant to low temperatures, and also resistant to abrasion and chemicals.
1-7 days (10000000 pcs)
52,04 €
-
Add to Favourites
FIBERFLEX 40D FILAMENT White 1,75mm Fiberlogs 850g
Fiberflex is a thermoplastic elastomer with a hardness of 40d Shore, which can be printed at a speed of up to 45 mm/s. This rubber material can be extended to 680 % of the original size. In addition, it is highly resistant to low temperatures, and also resistant to abrasion and chemicals.
1-7 days (10000000 pcs)
52,04 €
-
Add to Favourites
FIBERFLEX FILAMENT yellow 1,75mm fiberlogs 850g
Fiberflex is a thermoplastic elastomer with a hardness of 40d Shore, which can be printed at a speed of up to 45 mm/s. This rubber material can be extended to 680 % of the original size. In addition, it is highly resistant to low temperatures, and also resistant to abrasion and chemicals.
1-7 days (10000000 pcs)
52,04 €
-
Add to Favourites
Hips Filament Natural 1,75mm Fiberlogs 850g
Hips from Fiberlogy is not just a support material! Filament hips allows the use of two ways. It can be used as the base material itself, ie the print will only be made of HIPS, or it can also be used to print support in combination with other base material (ABS and others).
1-7 days (10000000 pcs)
29,02 €
-
Add to Favourites
Hips Filament White 1,75mm Fiberlogs 850g
Hips from Fiberlogy is not just a support material! Filament hips allows the use of two ways. It can be used as the base material itself, ie the print will only be made of HIPS, or it can also be used to print support in combination with other base material (ABS and others).
1-7 days (10000000 pcs)
29,74 €
-
Add to Favourites
Hips Filament Graed Gray 1,75mm Fiberlogs 850g
Hips from Fiberlogy is not just a support material! Filament hips allows the use of two ways. It can be used as the base material itself, ie the print will only be made of HIPS, or it can also be used to print support in combination with other base material (ABS and others).
1-7 days (10000000 pcs)
29,74 €
-
Add to Favourites
Hips Filament Black 1,75mm Fiberlogs 850g
Hips from Fiberlogy is not just a support material! Filament hips allows the use of two ways. It can be used as the base material itself, ie the print will only be made of HIPS, or it can also be used to print support in combination with other base material (ABS and others).
1-7 days (10000000 pcs)
29,74 €
-
Add to Favourites
Wood Filament brown 1,75mm Fiberlogs 750g
Fiberwood is a desired material in the world of plastic, where it deviates thanks to its natural appearance. Prepared prints can be machined, painted, painted and dyed, which also gained great popularity. Thanks to the beautiful surface of the models it offers a wide range of uses, not only for works of art and design elements.
1-7 days (10000000 pcs)
43,10 €
-
Add to Favourites
Wood Filament Natural 1,75mm Fiberlogs 750g
Fiberwood is a desired material in the world of plastic, where it deviates thanks to its natural appearance. Prepared prints can be machined, painted, painted and dyed, which also gained great popularity. Thanks to the beautiful surface of the models it offers a wide range of uses, not only for works of art and design elements.
1-7 days (10000000 pcs)
43,10 €
-
Add to Favourites
EASY PLANEMT BERS 1,75mm FIBERLOGY 850G
Easy PLA is one of the most widely used 3D printing materials, as the name suggests for its easy use. This filament lasts quite a lot and its properties allow printing of very accurate and complicated elements.
1-7 days (10000000 pcs)
24,42 €
-
Add to Favourites
EASY PLALAMENT Silver Inox 1,75mm Fiberlogs 850g
Easy PLA is one of the most widely used 3D printing materials, as the name suggests for its easy use. This filament lasts quite a lot and its properties allow printing of very accurate and complicated elements.
1-7 days (10000000 pcs)
26 €
-
Add to Favourites
FIBERFLEX 40D FILAMENT FILLAGE 1.75mm Fiberlogs 850g
Fiberflex is a thermoplastic elastomer with a hardness of 40d Shore, which can be printed at a speed of up to 45 mm/s. This rubber material can be extended to 680% of the original size. Highly resistant to low temperatures.
1-7 days (10000000 pcs)
52,04 €
-
Add to Favourites
EASY PLALAMENT pink 1,75mm fiberlogs 850g
Easy PLA is one of the most widely used 3D printing materials, as the name suggests for its easy use. This filament lasts quite a lot and its properties allow printing of very accurate and complicated elements.
1-7 days (10000000 pcs)
24,08 €
-
Add to Favourites
EASY PLALAMENT Green 1,75mm Fiberlogs 850g
Easy PLA is one of the most widely used 3D printing materials, as the name suggests for its easy use. This filament lasts quite a lot and its properties allow printing of very accurate and complicated elements.
1-7 days (10000000 pcs)
24,08 €
-
Add to Favourites
EASY PLAYENT White 1,75mm Fiberlogs 2500g
Easy PLA is one of the most widely used 3D printing materials, as the name suggests for its easy use. This filament lasts quite a lot and its properties allow printing of very accurate and complicated elements.
1-7 days (10000000 pcs)
67,02 €