PLO + FILAMENT made of recycled material
Suitable for printers who like to focus on details,
For all I like to edit my creations after printing and printing it does not end for them. And for those who are 1 kg little is available Builder Pack weighing 3kg.
Color: With each batch it will be a little different, as it is a recycled not colored. Can be in different shades of gray
Suitability of using PLA:
Plated is easy to print, is biodegradable (thus environmentally friendly). However, it is a material that is not suitable for outdoor use, degrades and fragile when exposed to UV radiation. It is also not temperature resistant. Already at 30 - 50 ° C prints soften and deform. Therefore, it is not advisable to carry prints in cars. PLA is a flammable material. Therefore, we recommend that you do not leave the printer when printing with this material unattended for a long time.
Pla
- the material cannot be easily sanded, grinding (friction) produces heat that causes "pulling" fibers from the print. Therefore, it is advisable to cool the printout for manual grinding, for example by grinding it underwater. For the same reason, holes are difficult to drill into the print (again the problem with warming up). It is advisable to spray the material first (used in modeling) and then grind, spray again and over and over until the model is perfect for us and then spray it with paint. The resulting model can also be inserted into the "tumblers" along with shells, stones, remnants of filamers pieces of prints ...
bonding Pla : second glue with spray activator (sometimes the second glue itself)
Recommended Pla : To print, you just need to use commonly used nozzles . The nozzle diameter is chosen according to the softness of the surface we want to achieve according to the layer force setting during printing. There is a recalcular formula for this optimal setting, nothing less is enough to rule +-0.2mm - ie if we want a layer thickness of 1.25 should not have a nozzle larger than
23,96 €