FILAMENT-PM PLA GRAY 1.75 mm 1 kg

Press strings of Czech brand Filament PM, which falls under the company Plasty Mladeč, belongs to quality materials and guarantee trouble -free printing. In production, laser measurement of material thickness is used to ensure a constant string diameter along its entire length. These strings are protected by a double cover against UV radiation and in each package there is a drying bag that prevents possible moisture on the material. Print strings are made in a wide range of colors.

Pla white print string is a universal material for FDM printing technology, suitable for printing large items. It is the most used material for 3D printing without the need to heat the print pad.

Suitability of using PLA:

Plated is easy to print, is biodegradable (thus environmentally friendly). However, it is a material that is not suitable for outdoor use, degrades and fragile when exposed to UV radiation. It is also not temperature resistant. Already at 30 - 50 ° C prints soften and deform. Therefore, it is not advisable to carry prints in cars. PLA is a flammable material. Therefore, we recommend that you do not leave the printer when printing with this material unattended for a long time.

Plastal finish Pla - the material cannot be easily sanded, grinding (friction) produces heat that causes "pulling" fibers from prints. Therefore, it is advisable to cool the printout for manual grinding, for example by grinding it underwater. For the same reason, holes are difficult to drill into the print (again the problem with warming up). It is advisable to spray the material first (used in modeling) and then grind, spray again and over and over until the model is perfect for us and then spray it with paint. The resulting model can also be inserted into the "tumblers" along with shells, stones, remnants of filamers pieces of prints ...

bonding Pla : second glue with spray activator (sometimes the second glue itself)

Recommended Pla : To print, you just need to use commonly used nozzles . The nozzle diameter is chosen according to the softness of the surface we want to achieve according to the layer force setting during printing. There is a recalcular formula for this optimal setting, nothing less is enough to rule +-0.2mm - ie if you want a layer thickness of 1.25 should not have a nozzle larger than 0.3mm . For larger layers we use a nozzle with a larger diameter at weaker on the other hand with smaller ones.

pad temperature - no heating or just for better adhesion of the material to a pad up to 50 ° C.

Recommended settings: print temperature: 210 ° C , retraction 0.8mm, speed 60mm/s (outline 70%), layer 0.2mm - 0.05mm. When using a PEI foil printer, the mat must be easily degreased. The resulting print is smooth, slightly shiny without visible errors.

For storage we recommend securing a dry environment. In poor storage in a humid environment, it absorbs moisture, which manifests itself as bubbles on the surface.

outer coil diameter 202 mm, inner hole 50 mm, width 90 mm. The weight of the coil including the packaging 1.4 kg. The print string is wound on black coil, plastic vacuum packaging, cardboard box and one more plastic packaging.

The amount of PLIAMENT fibers per 1kg coil is about 330 meters. The value is approximate as even the diameter of the string can fluctuate according to the tolerance given by the manufacturer. For Mladeč plastics it is +- 0.05mm.

Eng

Improved Pla - Even Easier Printable, Better Layer Cohesion and Though.

Filament from the Czech Brand Filament PM WHICH FALLS UNDER The Plastic Mladeč Company Belongs to Quality Materials Providing Trouble-Free Printing. The Use Laser Measurement of the Thickness of the Material During the Production, WHICH ENSURES and CONSTANT DIAMETER OF THE FILAMENT Among Its Entire Length. This Filament Is Protcted by A Double Cover Against the UV Radiation and There Is A Drying Bag in Each Package, Which Protects Material From Possible Moisture Effects. Filaments Are Produced in A Wide Range of Colors.

Pla White Filament is an Universal Material for 3D FDM Printing Technology Suitable for Printing Large Objects. It is the bridge comonly set Material for 3D Printers without the Need to use heated Bed.

when and How to use plastic:

PLA is easily printable and it is biodegradable (Therefor Environmentally Friendly). However it is not a Material WHICH IS SUITABLE TO BE USED OUTDOORS, BECAUSE IN Such Case It Degrades and Brittle Uv Light. Also it is not heat resistant. Even at temperatures 30 - 50 ° C The material softens and deforms. For that reasson it is not recommended to drive with dry Outprints in the car. Pla is Flammable Material. DUE TO THAT FACT IT IS RECOMMANDED NOT TO LEAVE THE PRINTER UNATTENDED

Pla Surface Treatment - This Material Is Not Easily Sanded, While Grinding (FRICTION) IT Generates Heat and That Causes The Fibers to "Pull" From the Print. THEREFORE, WHEN SANDING BY HAND, IT IS RECOMMANDED TO COOL The Printout, for Example by Sanding Under Water. For the same reasson it is also difficult to drill holes in the printout (Again, and Heating Problem). It is suitable to spray the material with and Filler First The Resulting Model Can Be Also inserted Into The “Saucepan” Along with the Shells, Stones, Remnants of Filaments and Pieces of Prints ...

PLA and GLUE: Instant Glue With Spray Activator

Recommended Setting for Pla Material: Commonly Used Nozzles Are Suitable. Diameters Can Be Chosen According to the Fineness of the Surface Which We Want To Achieve or According to the Setting of the Layer Thickness During Printing. You can use and Simple Conversion Formula for This Optimal Setting. Rule is + - 0.2 mm is enuigh - ie if we want and Layer Thickness of 1.25, The NAZZLE DIAMETER SHOULD NOT BE GREATER THAN 0.3 mm. If there is and Larger Layer, Use and Larger Diameter of the NAZZLE, for Weaker Ones, Use and Smaller One.

Heated Bed Temperature - Warming is Not Required p>

Setting: Print Temperature: 210 ° C , Retracion 0.8mm, Speed ​​60mm/s (Outline 70%), Layer 0.2mm - 0.05mm. When useing the printer with pei foil, it is necessary to degrease the pad well. The Resulting Print Is Smooth, Slightly Glossy and Without Visible Errors.