The basis of Wood material is classic PLA combined with particles of ground wood. Such a material has a unique feature. Not only does it look like wood, but also retains the structure of real wood. Finished prints can be painted and machined.
- resistance to material deformation
- durability and stability of prints
- high quality
Advantages Spectrum Wood:
- from biodegradable raw materials
- printing of 0.4 mm nozzle
- Very easy print
- print surface
- prints with the appearance of real wood
- Possibility of grinding and painting
- Easy to separate the object from the printing area
The print string is wound on a transparent coil. The coil contains information about the type of material, diameter and recommended to the print temperature. Each coil is vacuum packed with a moisture absorber. Paper instructions on the operator inside. The whole in the original packaging fiber Spectrum.
General Information
Color: oak wood
Fiber diameter: 1.75 mm
Dimensional tolerance: ± 0.05 mm
print temperature: 190-220 ° C
Heated table: does not require SE
Pure weight: 500 g
Total weight including packaging: 800 g
coil dimensions: St. ext. - 20 cm,
st. ext. - 5,2 cm,
width - 5.5 cm
Physical and thermal properties of base material
Specific weight: 1.24 g /cm3
MFR (210 ° C /2,16 kg), g /10 min: 6 (Astm D1238)
Thermal stress temperature: 55 ° C < BR /> Tensile strength: 53 MPa (Astm D882)
Tensile strength: 60 MPa (Astm D882) impact: 16j/m (Astm D256)
More from category
Additional information
Category: | Wood filaments |
Color: | wood |
Weight: | 0,5 kg |
Average: | 1,75 mm |
Diameter: | ± 0,05 mm |
Bed temperature: | 0-60°C |
Nozzle temperature: | 190-220°C |

25,23 €