ESD Pet-G fiber is designed to print part of electronic equipment exposed to damage due to electrostatic discharge. Its excellent properties of electric charge scattering ensure the safety of integrated circuits and other electronic components and minimize the risk of partial or permanent damage.
The Pet-G ESD fiber does not require a closed chamber and does not need high printing temperatures as opposed to ABS ESD, allowing wider use. Recommended nozzle (not required) min. diameter 0.5 mm.
Clean weight: 0.5 kg
print temperature: 230 - 250 ° C
bed temperature: 85 ° C
diameter tolerance: +/- 0.02 mm
Oval tolerance: + 0.01 mm
The manufacturer states that resistance values (resistivity) have been tested on printed products and these tests were performed by certified test equipment.
The above shows that the ESD /PetG material is very high and electrical conductivity is negligible.
Additional information
| Category: | PETG |
| Color: | black |
| Weight: | 0,5 kg |
| Average: | 1,75 mm |
| Diameter: | ± 0,02 mm |
| Bed temperature: | 85°C |
| Nozzle temperature: | 230 - 250 °C |
59,53 €