LW-PLA is the first filament of its kind by the Dutch manufacturer Colorfabb, which uses active foam technology to create light plants with low density. At about 230 ° C, the material starts to foam and increases its volume almost three times. Nevertheless, 3D printing is very accurate with an amazingly matt surface that is easy to work.
You can also greatly shorten the printing time using large layer heights or extra thick individual perimeters.
Span>
to accurate printing and to achieve your desired properties you need to fine tuning and optimization for LW PLA.
span> -Size: 0.8125rem; Letter-Spacing: 0.02em; "> Principle of active foaming technology:
It depends on speed, temperature and flow. To control the LW PLA expansion, focus on these print parameters, this allows you to change the density of the material of different parts on a particular model.
Colorfabb LW PLA recommends four printing phases to achieve maximum expansion at a given speed, temperature and flow.
Print more models!
Reduction of flow also means less filament consumption. Therefore, with LW-PLA material can be printed two to three times as many parts as with normal plants
Additional information
Category: | PLA |
Color: | red |
Weight: | 0,75 kg |
Average: | 1,75 mm |
Diameter: | ± 0,1 mm |
Bed temperature: | 0-60°C |
Nozzle temperature: | 195-250°C |
50,25 €