Aurabol print strings are a new discovery from Znojmo. It deserves its attention for the use of quality ingredients without unnecessary admixtures, which will provide you with durable prints.
Filament PET-G is a thermoplastic polyester that provides chemical resistance, durability and excellent workability. printing. PETG adheres to most common printing surfaces, sometimes too much. When printing on PEI or on glass, we recommend using sticks, hair paint or 3dlac.
-
- resistance of chemicals (acids, policies, salts)
- quality and glossy surface
- good abrasion resistance
- Optimized for FDM (FFF) 3D printers
- Excellent adhesion on the heated plate, Kapton, Buildtak, Glass etc.
- low deformation in the cooling of material
- great layer adhesion
- high thermal stability up to 70 ° C
- Easy Print
- without odorless
advantages of Petg
Good durability, affordability. Suitable for functional prototypes. Recyclable.
PETG
PETG is an excellent material for use in modern 3D printers. With the correct print settings, the PETG Filament prints easily, has excellent layer adhesion and is without unpleasant odor. It also has low death. This allows for larger prints than ABS.
At the same time it is extremely strong and has good chemical resistance. This allows him to print objects that can withstand high temperature, application safe for food and exceptional impact.
What is the difference between PET and PETG?
Although these compounds look similar, at the molecular level they are fundamentally different materials. PET is the result of a combination of two monomers.
PETG, however, also includes glycol, which gives it other chemical properties than PET. He also has better impact resistance.
coil dimensions:
Empty coil weight 250gr (transparent)
Empty coil weight 220gr (black)
Diameter outer 300 mm
Shaft hole diameter 55 mm
coil width 70 mm
Package dimensions (box):
80 x 230 x 200 mm
Made in the Czech Republic.
This product is made of Virgin Granulate.
admixtures.
Properties:
- ease of printing
- very great accuracy of detail
- without deformations
- Biodegradible material
- Made of renewable sources
Settings:
- Recommended Print Temperature: 245 - 255 ° C
-
- Flow Flow: 100 %
- Retraction: ± 5 mm
- Recommended printing speed: 30 - 60 mm/s
- Filament length on coil: approx. 340 meters
- Weight of: 1000 grams
from the so -called Virgin granulate - does not contain recycled or other undesirable admixtures.
> Dimensions of the coil >
in Yrobeno in the Czech Republic.
Additional information
| Category: | PETG |
| Color: | red |
| Weight: | 1 kg |
| Average: | 1,75 mm |
24,25 €