【EPLA-ST】 Epla-St or EPLA Super Tough is an improved version of PLA, which is characterized by high impact resistance, high fracture point, and notch toughness.
【Stable dimensional tolerance】 minimum tolerance and small shrinkage - ensure consistent administration and stable prints, no clogging, extremely high print success, resulting in printed components that have excellent finish and are very accurate. (depending on the printer)
【Without knocking and clogging 】 Material with excellent circularity and very low tolerance of the diameter, does not overlap or swallow. It melts, does not crack, does not contain bubbles. Print smoothly and repeatedly without blocking a nozzle or extruder.
【Environmental -friendly material】No possibility of harm to the user or the environment. Ideal for safe printing. ESUN FILAMENT Delivered in a drift -picked bag that keeps it dry and out of dust and foreign particles, prevents nozzles from clogging and providing smooth 3D models.
- string diameter: 1.75 ± 0.03 mm
- coil size: diameter 200 mm - width 64 mm - center hole 52 mm
- Pack size: 216 x 202 x 76 mm
- Weight Package: 1,48 kg
- nozzle temperature: 210-230 ℃
- pad temperature: 45-60 ℃
- tensile strength: 34.3 MPa
- Extension at a quarry point: 90%
- bend strength: 43 MPa
- Fault strength module: 1477 MPa
- notch toughness: 63 kj / ㎡
- Manufacturer: Esun
Comparison of different PLA types from Esun:
| Pla | Pla+ | Pla - ST | |
| tensile strength | 78 MPa | 63 MPa | 34.3 MPa |
| Extension at a quarry point | 14 % |
20 % |
90 % |
| Flyb strength | 90 MPa | 74 MPa | 43 MPa |
| Fault strength module | 1984 MPa | 1934 MPa |
1477 MPa |
| zrub toughness | 5.6 | 9 | 63 |
Additional information
| Category: | PLA |
| Color: | black, grey, natural |
| Weight: | 1 kg |
| Average: | 1,75 mm |
| Diameter: | ± 0,03 mm |
| Bed temperature: | 45 - 60°C |
| Nozzle temperature: | 210 - 230° C |
28,04 €