with PLA Spectrum fiber gets your 3D model :
- resistance to material deformation
- durability and stability of prints
- high quality
Advantages Spectrum Wood :
- from biodegradable raw materials
- printing of 0.4 mm nozzle
- Very easy print
- print surface
- prints with the appearance of real wood
- Possibility of grinding and painting
- Easy to separate the object from the printing area
The print string is wound on a transparent coil. The coil contains information about the type of material, diameter and recommended to the print temperature. Each coil is vacuum packed with a moisture absorber. Paper instructions on the operator inside. The whole in the original packaging fiber Spectrum.
General information
Color: Natural wood
Fiber diameter: 1.75 mm
Dimensional tolerance: ± 0.05 mm
print temperature: 190 ° - 220 ° C
Heated table: Not required
Clean Weight: 500 G
Total Weight: 800 G
Coil Dimensions: st. ext. - 20 cm, st. ext. - 5.2 cm, width - 5.5 cm
Physical and thermal properties of base material
Specific weight: 1,24 g /cm
MFR (210 ° C /2,16 kg), g /10 min: 6 (Astm D1238)
Thermal stress temperature: 55 ° C
Tensile strength: 53 MPa (Astm D882)
Tensile strength: 60 MPa (Astm D882) D882)
impact resistance: 16 J/M (ASTM D256)
More from category
Additional information
| Category: | Wood filaments |
| Color: | wood |
| Weight: | 0,5 kg |
| Average: | 1,75 mm |
| Diameter: | ± 0,05 mm |
| Bed temperature: | 0-60°C |
| Nozzle temperature: | 190-220°C |
25,23 €