na3D
Producer website: www.na3D.cz
-
Nozzle cleaning drill
Drill bits with a diameter of 0.2 mm / 0.25 mm / 0.3 mm / 0.35 mm / 0.4 mm / 0.45 mm / 0.5 mm used for cleaning nozzles. If the nozzle is clogged, heat it to approx. 200 °C and then clean it with a drill in gentle circular movements in a clockwise direction.
In stock <10pcs
0,81 €
-
Fan Extender
Expansion module for RAMPS 1.4 to connect additional fans. Use, for example, for cooling chambers, printing, hotend, etc. The module requires a FW update.
In stock <10pcs (3 pcs)
8,47 €
-
LM12UU linear bearing
Linear bearing with 4 rows of balls suitable for bars with a diameter of 12 mm. (The product can be ordered after 1 piece, the photo is only illustrative.)
In stock <10pcs (2 pcs)
2,08 €
-
Sensor for calibration of Bltouch pad original Antclabs
Original BLTOUCH V3.1 sensor for automatic calibration of the printing area.
In stock <10pcs (1 pcs)
59,53 €
-
Heatbreak hotbreak
Replacement heatbreak for printers Průša, Anet, Rebel, etc. Several variants of dimensions.
In stock <10pcs
from 2,08 €
-
Set spring, bolt and radiated nut
Spring for alignment of heating pad. Set spring with screw and radiated nut.
In stock <10pcs (1 pcs)
1,23 €
-
Hotend 2.0
Bowden Hotend ideal for multi-headed printers. Thanks to the round heatbreak, the height is easy to adjust. The heating cube contains a hole for a roller thermistor. Hotend contains a nozzle 0.4/1.75.
In stock <10pcs
19,10 €
-
Kapton tape
Kapton tape for preparing the printing mat. With kapton you get a glossy surface of the first layer.
In stock <10pcs
from 4,21 €
-
MK10 - CR10 hotend Creality - Anet
MK10 Hotend used in Creality Printers (Ender 3, 5) and Anet (E10, E12, E16).
In stock <10pcs
14,85 €
-
Ceramic screwdriver
Ceramic screwdriver for secure current adjustment on the stepper engine control.
In stock <10pcs (3 pcs)
2,08 €
-
T8x8 trapezoidal screw
A trapezoidal screw has more precise manufacturing tolerances than classic metric threads. The screw is of size T8x8 - 4 running thread. Without nut - a choice of a classic nut or a nut with a spring to limit the clearance.
In stock <10pcs
from 5,49 €
-
Arduino Uno with USB cable
Basic clone Arduino Uno including USB cable. Fully compatible with the original. Arduino UNO is a development board based on the ATMEGA328 microcontroller.
In stock <10pcs (2 pcs)
8,47 €
-
CNC Shield
Control plate for modeling CNC machines. The board can be used as an extension to multiple 3D printer control boards. CNC Shield is available in the Uno and Nano variant.
In stock <10pcs
from 4,21 €
-
Pulley GT2-6
Pulley for belt GT2 - 6 (belt width 6 mm). Pulley dimensions according to size selection. (The product can be ordered 1 piece at a time, the photo is only illustrative.) GT2-6 idler pulley.
In stock <10pcs
from 2,51 €
-
MK10 brass nozzle - Flashforge, Makerbot, Wanhao
Replacement brass nozzle for Flashforge, Makerbot, Wanhao printers.
In stock <10pcs
2,94 €